OHM 2.1
Offset Hand M-LOK 2.1
No need to worry about getting a right or a left hand OHM. This is a reversible OHM with a bit more offset than the OHM Legacy. This will also benefit setups that needed a bit more offset (.45”) compared to the OHM Legacy (.25”).
7075-T6 Type III anodized in black.
Contents:
1 x OHM 2.1
Dimensions:
L: 4.335 in (110.109mm)
W: 1.05in (26.67mm)
H: .4in (10.16mm)
Offset: .45in (11.43mm)
Weight with hardware: 1.5oz
Made in the USA
DO NOT EXCEED 35 IN-LBS ON METAL RAIL, OR 15 IN-LBS ON POLYMER RAIL. Ensure M-LOK™ nuts are fully perpendicular to M-LOK™ slots in rail (fully seated). For OHM to OHM M-LOK™ 25 IN-LBS is recommended.
Offset Hand M-LOK 2.1
No need to worry about getting a right or a left hand OHM. This is a reversible OHM with a bit more offset than the OHM Legacy. This will also benefit setups that needed a bit more offset (.45”) compared to the OHM Legacy (.25”).
7075-T6 Type III anodized in black.
Contents:
1 x OHM 2.1
Dimensions:
L: 4.335 in (110.109mm)
W: 1.05in (26.67mm)
H: .4in (10.16mm)
Offset: .45in (11.43mm)
Weight with hardware: 1.5oz
Made in the USA
DO NOT EXCEED 35 IN-LBS ON METAL RAIL, OR 15 IN-LBS ON POLYMER RAIL. Ensure M-LOK™ nuts are fully perpendicular to M-LOK™ slots in rail (fully seated). For OHM to OHM M-LOK™ 25 IN-LBS is recommended.
Offset Hand M-LOK 2.1
No need to worry about getting a right or a left hand OHM. This is a reversible OHM with a bit more offset than the OHM Legacy. This will also benefit setups that needed a bit more offset (.45”) compared to the OHM Legacy (.25”).
7075-T6 Type III anodized in black.
Contents:
1 x OHM 2.1
Dimensions:
L: 4.335 in (110.109mm)
W: 1.05in (26.67mm)
H: .4in (10.16mm)
Offset: .45in (11.43mm)
Weight with hardware: 1.5oz
Made in the USA
DO NOT EXCEED 35 IN-LBS ON METAL RAIL, OR 15 IN-LBS ON POLYMER RAIL. Ensure M-LOK™ nuts are fully perpendicular to M-LOK™ slots in rail (fully seated). For OHM to OHM M-LOK™ 25 IN-LBS is recommended.